Dense and insulating bricks, dry-pressed or extruded and fired in our own kilns — from fireclay and high-alumina to sillimanite quality, with special shapes machined to drawing.
Product lines below are indicative — grades and formats are selected with our technical team against your operating conditions.
Fireclay and high-alumina bricks pressed on more than ten hydraulic presses and fired in tunnel and shuttle kilns — the backbone of ladle, reheat and kiln linings.
Extruded insulating firebricks for hot-face and backup insulation — light, dimensionally stable and machinable, produced on two dedicated extrusion lines.
Every IFB and special shape is cut and ground in-house to tight tolerances — for lining precision you can see at installation.
Three tunnel kilns and two shuttle kilns at Bondeno fire every brick we sell — firing curve and batch control documented per lot.
From raw material preparation to firing and machining — production stays in-house, so quality does too.
Testing to ASTM, EN, ISO and PRE standards in our 800 m² central laboratory.
Bricks, monolithics, precast, anchors and auxiliaries — engineered to work together as one lining.
Lining design, installation supervision and post-mortem analysis — with 24-hour RFQ response.
Tell us your application and operating conditions — our technical team responds within 24 business hours.